Underlayment products for a metal roofing project to be used beneath the seam should be carefully selected in order to provide optimal longevity of the building. You should take several considerations before you decide the roofing system design including the four barriers needed and these are the vapor retarder, air barrier, thermal insulation and water barrier. All these are needed to be placed in the right location for any given season.

The longevity of service can be affected by these factors. Therefore, your metal roofing contractor must be able to determine the roofing system itself, the possible climate within that particular area, the roof slop and geometry of the building. Improper selection of metal roof underlayment can lead into roof leakage and also it may be able to entrap the moisture because of the vapor diffusion or possibly air exfiltration. These factors may affect the quality of the roof that may deteriorate the metal materials which you may need to make necessitating repairs which are pretty much expensive.

Metal roof panel

The metal roof panel are intended and designed to span structural support. Yet, these supports do not include underlayment since the structure has substrate or deck to support the material. For architectural metal roofing, an underlayment is indeed a must in order to help control water leakage through the roofing system especially if there are numerous heavy rains or snows which are eventually melting before the spring.

Underlayment

Top notch underlayment is often designed in cold climates in order to protect the roofing system under ice dam leakage. While on the other hand, there are underlayment which are specified in a high temperature where the in-service can handle the as high as 240 degrees.

Traditional Underlayment

Most common materials for underlayment on a steep-lop metal roofing system is the non-perforated asphalt underlayment. Several types are available and these are the organic and inorganic reinforced underlayment. The design will depend on the local building or the architectural designs.

Synthetic sheet underlayment

These underlayment are made often made from polyethylene, polyolefin or polypropylene which are all made from plastic. These types of underlayment are less susceptible to wind damage and less sensitive to cold weather. The most common synthetic sheets underlayment sold in most part of metal roof Virginia are the vapor resistant.

Self-adhering Membrane Underlayment

This type of underlayment is typically impermeable for vapor to the substrate in order to get adjacent sheets from side to side. This is particularly designed to resist air pressure and serves as an energy efficient ventilation system air barrier material. This is commonly consisted of rubberized asphalt or butyl based adhesive with polyethylene sheets.

Alpha Rain Incorporated

Now that you understand the different types of underlayment sheets to be used in your metal roofing. You can finally determine what type of underlayment you’ll need for your metal roofing upgrades. Of course, just to make sure, consulting with the experts or with your metal roofing contractor will help you to decide for your underlayment. Choose Alpha Rain Incorporated, makers of patented roof ventilation system powered by Therma-Vent.

Upgrading Your Roofs to Metal Roofs – Beneficial for Your Home

Do you keep getting roof repairs time and time again which leads to extra unwanted expenses? Are you having trouble dealing with your roof leaks? Are you anxious about the cost of roof maintenance? Instead of worrying too much and spending most of your time and money with traditional roofing made from asphalt, Have you ever considered upgrading to metal roofing Virginia?

“Are you anxious about the cost of roof maintenance?”

Why Metal Roof?

Metal roofing is a great investment; after all, it’s your home. When it comes to durability and quality, nothing beats roofing made with metal. You will be able to relax a little once the installation is complete because it will be able to withstand all types of inclement weather. Also, your expenses for home improvement and maintenance will be lessened. Metal roofing installed correctly will no longer need repairs. The other upside is that the old tin roofs that we are removing are lasting 80-110 years, and the new prepainted Galvalume Steel metal roof will last even longer than the old tin roofs. We estimate over 150 years which would equal over 10 Asphalt roof replacement during that time costing over 5 times the cost than a metal roof in today’s dollars not including inflation and the cost of roofing pricing to replace your Asphalt roof every 15 years from now till the year 2165.

Pricey but Very Practical

Upgrading your roof into metal is a bit pricier than shingles. But you need to consider the longevity and service life of Metal roofing vs Asphalt; you’ll notice sooner or later that you made the right choice that is if you chose a Metal Roof. Metal roof helps your home reflect the sun from your home during the summer to keep it cool during the hottest months of the year. In addition, as winter comes, your metal roof will keep heat in during the cold season if the Therma Vent system is installed. Everything will be regulated due to insulation and a proper ventilation system. Having a metal roof will keep the noises down from the outside. In fact, metal keeps out extra noises and vibrations keeping your home peaceful which is a perfect place to relax and to bond with your family and loved ones.

“So now that you want a metal roof you can go find any roofer to install it right? Wrong!”

Go Green

This type of metal materials is recognized by the government which enables you to contribute to the environment. There will be no harmful chemicals that leak out of shingles, and your metal roof will not rust or break apart into your gutters much like Asphalt roofs as the naturally deteriorate and the granules fall into the gutters and then into your lawn or water drainage system. Metal roofs can increase the value of your home and will cause your resale to be quicker and for a higher amount according to national studies. So now that you want a metal roof you can go find any roofer to install it right? Wrong!

Alpha Rain Incorporated

We, Alpha Rain Incorporated have been in metal roofing installation for over a decade and a half. We serve metal roofing Virginia and are an ALI (Authorized Local Installer) to the homeowner of the new patented roof ventilation system which enables your home interior to minimize the heat. Our innovative ventilation system is ThermaVent and can decrease the temperature from 25 up to 40 percent cooler compared with other ventilation systems. We strongly believed that our design when it comes with efficiency and effectiveness of reducing heat is irrefutable for both quality and pricing.

The revolutionized smart cooling ventilation system is designed with a custom vented ridge that has a special eave venting that makes the release of the air cooler than before, reflecting and stopping the heat at the same time providing you the cool atmosphere you always want from your home.

Modernize Your Ventilation System with Alpha Rain Inc

Roofing is an essential part for every home. It protects you and your dear ones against the harmful UV (ultraviolet) rays, heavy rains, hurricanes, and snowstorms. If you do decide to upgrade or modify your roof, you can never go wrong with metal roofing.

Metal Roofing VA

Metal is considered one of the toughest materials you can find. Initially, metal roofing installation comes with a higher price compared to other roof materials such as asphalt shingles. But, when you think about your asphalt roofing in the long run, you’ll find out that this kind of investment makes no sense considering the average asphalt roof lasts only 15-20 years.  Where as an average Metal Roof will last 5 times that, (yes 100 years).  We remove old tin roofs that are 110 years old.  Yes, metal roofing is indeed expensive, but when it comes to longevity, this kind of house investment is really practical. In addition, it increases the value of your home.

Home Enhancement and Benefits

As homeowners, we definitely love our homes and it gives us the sense of satisfaction when our house attains desirable looks. There are wide varieties of metal roofing designs and choices that will surely match your taste.

Home Attic Insulation

According to the Department of Energy, home attic insulation is one of the most vital components. Improper insulation can cause air leakage which waste electricity consumption. It allows the hot temperature during summer to penetrate. This requires an energy efficient roof ventilation system in order to control the heat.

Metal Roofing and Ventilation System VA

We, Alpha Rain Incorporated the metal roofing company have been installing metal roofing in most areas of Central and Northern Virginia for over 15 years. From our experiences, we observed that newer homes have a big problem when it comes to high temperatures in the attic even though they have industry standard “proper ventilation.” Therefore, we developed a patented under metal roofing ventilation system which stops all three ways heat is transferred called the Therma-Vent.

Why Alpha Rain Inc.?

• The Therma-vent has the option to use an optimized MTO custom solar powered DC fans that let the fresh air come into the attic and lets out the hot that gets trapped inside your attic. Our vent fans powered by solar allows you to have the privilege of reducing your energy consumption and allows you to produce natural energy.

• When the solar panels receive the most direct sun levels, the Therma-vent fans will spin faster which allows fresh air to penetrate inside. When we install a metal roof with our own Therma Vent System it will decrease the heat in the attic from 30 up to 45 percent in you attic. Our metal roofing VA has a superior reflective property which reflects more of the sun’s rays that minimize the temperature in the roof.

We strongly believe that our competitors in the industry will not be able to match our great results and superior quality. Alpha Rain Inc. is a top notch steel roofing company in Virginia with 35 years warranty on coating from peeling or fading.

Custom Fit Metal Roofing Aldie VA

  We are Alpha Rain The Steel Roofing Company. For Metal Roofing Aldie VA we have created a patented roof ventilation system. We have installed over many installations with this type of Ventilation system. I felt a need to talk about it pertaining to what the results were in relation to a roof our firm installed this particular venting method on. We examined the temperature level and it was 96 degrees outside and 150 degrees inside the attic room, after that once we applied the venting system it was 96 degrees outside and it was 96 degrees inside the attic at the base.

These particular outcomes have rarely been found on a process which is actually budget friendly. We have been investigating this type of air flow system for more than several years and the primary issue of the systems from the past was without a doubt the costs required installing them. The majority of the preceding systems use a counter batten system, which while it may get a few results the price tag is without a doubt way out of hand, and you are using a good deal of wood which with our Therma Ventilation system you do not have to use. If you enjoy identifying methods that will save you money on your cooling cost with you AC, then you really should at the very least talk with our company and find what exactly your plans could be. Our direct numbers are listed below and we are a low stress firm that will not push you into something that you do not need.

    Underneath we have our contact information, also shown below I contain a web site to the Metal Roofing Alliance. This is the place you will come across contractors, in addition to just us. We believe competition will not be able to present you materials similar to our patented Therma Ventilation System, our enhanced MTO custom solar ridge fans, or perhaps our Never leak W Valley, simply among others. We leave it up to you the potential client to discover for yourself. Check out at the video clip below named Metal Roofing Aldie VA, you can surely furthermore touch base with our team below

    We are a part of the Metal Roofing Alliance as listed above, which is a great place to get more metal roofing information. Please Contact us for more information or for a free estimate for Metal Roofing Aldie VA, or if you live in or around, Middleburg, Fairfax, or any other part of Northern Virginia, Marshall, or The Plains. Please contact us for prices on your new tin roofing.

 

 

 

Custom Metal Roofing Paris VA

We have created a patented roof ventilation system for Metal Roofing Paris VA. We have installed over three dozen installations with the indicated advanced patented ventilation system. I felt a need to talk about it concerning what the results were on a residential property our firm installed this particular ventilation solution on. We tested the ambient temperature and it was 96 degrees outside and it was 150 degrees in the attic room, Then once our team added the venting system it was 96 degrees outdoors and it was 103 degrees inside the attic room at the top and the same 96 degree at the bottom of the attic.

Alpha Rain The Metal Roofing Company and these particular developments have actually rarely been found in a method in which is really reasonably priced. Our team have been researching this kind of venting product for around 9.5 years and the most common question concerning the systems from the past was simply the expense required installing it. The majority of the good old days techniques use a wood system, which while this method could attain various results the price is without a doubt to expensive, also you are using a great deal natural sources which with our new venting product you do not have to use. If you are exploring process for your house to gain a much cooler attic in the summer months that will not fight your AC unit then you should at the very least talk to our business and find what your options are.  We have our direct numbers listed below and above. We are a low pressure firm.

We believe that the competition will not be able to provide you products like our patented under metal roof ventilation system, or any number of our exclusive technehies in how we install our Metal Roofing.  Take a look at the video below named Metal Roofing Paris VA.

Alpha Rain furnishes exclusively the first-rate Metal Roofing Systems that comes with a 35 year guarantee on the Coating from Peeling off or even fading by Sheffield Metals. Our company provides a low gloss matte finish prepainted metal roof in which enhances energy efficient. Our company belong of the Metal Roofing Alliance as mentioned above, which is certainly a very good spot to acquire supplementary steel roofing guidance. Please Contact our team for more details or for an absolutely free estimate for steel roofing if you live in Metal Roofing Paris VA or in Warrenton, The Plains, or any other area of Northern Virginia, Marshall, or Upperville.  Please speak with us for pricings concerning your brand new tin roof.

 

 

 

540-687-0603 is Our Alpha Rain main number, This video is for Leesburg VA Metal Roofing I will show and talk about glossy paint versus Matt paint for a metal roof. We are alpha rain the metal roofing company.
Take a look at our video and please check us out at https://alpharain.com/contact-us/

For more information please fill out our contact us form below or take a look at our videos below.

Here are other posts that are similar for Leesburg Va

1. Solar Attic Fans: https://alpharain.com/leesburg-va-metal-roofing-solar-fans-2
2. Attic Venting: https://alpharain.com/leesburg-va-metal-roofing-attic-venting/
3. Galvalume Vs. Galvanized: https://alpharain.com/leesburg-va-metal-roofing-galvalume-galvanized/

Connect with Alpha Rain
https://www.facebook.com/pages/Alpha-Rain-Metal-Roofing/463335185396
https://plus.google.com/108122333512369437504/videos
https://twitter.com/MetalRoofingVA
https://www.youtube.com/user/AlphaRainRoofing

Ask A Question:
https://alpharain.com/contact-us/#
Our Blog:
https://alpharain.com/blog/
Our Local Blogs
http://leesburgmetalroofing.wordpress.com/
http://warrentonmetalroofing.wordpress.com/
http://culpepermetalroofing.wordpress.com/
http://charlottesvillemetalroofing.wordpress.com/
http://fredericksburgmetalroofing.wordpress.com/
http://arlingtonvametalroofing.wordpress.com/
http://fairfaxmetalroofing.wordpress.com/
http://middleburgmetalroofing.wordpress.com/

 

Alpha Rain at 540-222-1642, this video is for Leesburg VA Metal Roofing attic ventilation, I will show and describe how we ventilate the attic. We have been working on custom ventilation for our metal roofs for over 10 years, and now we offer a very efficient way to ventilate your attic and roof.  We are alpha rain the metal roofing company.

Take a look at our video and please check us out at https://alpharain.com/contact-us/ 540-222-1642

Here are other videos made just for Leesburg Va

https://www.youtube.com/user/AlphaRainRoofing 
1. Vented J Channel: https://www.youtube.com/watch?v=VJQTyqBTyfo
2. Snowbirds: https://www.youtube.com/watch?v=uXpAdmCbxac
3. W Valley: https://www.youtube.com/watch?v=o7Rz0ei24xE
4. Radiant Barrier: https://www.youtube.com/watch?v=x844FTJLGHc
5. Chimney Flashing: https://www.youtube.com/watch?v=nuGUqPOIdBY
6. Double Lock Panel: https://www.youtube.com/watch?v=m7TZZBYcA00
7. Metal Roofing Pre-Painted: https://www.youtube.com/watch?v=htdFLu64XNQ
8. Vented Ridge Cap: https://www.youtube.com/watch?v=678236SR8Nw
9. Custom Drip Edge: https://www.youtube.com/watch?v=WnZ0iv7yeqo
10. Metal Roofing Screws or Nails: https://www.youtube.com/watch?v=rlqkwsGi5MA
11. Metal Roofing Matte Paint Glossy Paint: https://www.youtube.com/watch?v=rk-xYEUWvkE
12. Galvalume or Galvanized: https://www.youtube.com/watch?v=fd41UpBbTAA
13. Solar Fans: https://www.youtube.com/watch?v=y616NumA-OU

Connect with Alpha Rain
https://www.facebook.com/pages/Alpha-Rain-Metal-Roofing/463335185396
https://plus.google.com/+Alpharainmetalroofs
https://twitter.com/MetalRoofingVA
https://www.youtube.com/user/AlphaRainRoofing

Ask A Question:
https://alpharain.com/contact-us/#
Our Blog:
https://alpharain.com/blog/
Our Local Blogs
http://leesburgmetalroofing.wordpress.com/
http://warrentonmetalroofing.wordpress.com/
http://culpepermetalroofing.wordpress.com/
http://charlottesvillemetalroofing.wordpress.com/
http://fredericksburgmetalroofing.wordpress.com/
http://arlingtonvametalroofing.wordpress.com/
http://fairfaxmetalroofing.wordpress.com/
http://middleburgmetalroofing.wordpress.com/

Please fill out your information below if you are interest in Metal Roofing or this video post.

Recently we were taking a training class so we could be certified for a certain manufacturer’s stone coated metal roofing. We were working on a mockup roof, seen below, and were being trained on how to do chimney flashing. We noticed they were using a 3 piece flashing instead of the single unit flashing we use. After the session, we asked if we could make the flashing we use so we could see if they would approve it. My son, Paul, and our foreman, Walter, made our flashing. After we installed it the trainer asked: “what else do you do that is different?” We showed him a whole variety of specialty flashing. He acknowledged ours were better but that he didn’t know of any metal smiths that had the skill to duplicate our flashing. We were pleased but not surprised.

For more information about metal, asphalt or solar please visit our website or call us at 540-222-1642.

Our first attempt at installing a roof ventilation system worked great but was very expensive and labor intensive. As you can see this prototype started with a bubble foil bubble insulator and then a cumbersome wooden counter batten system Even though it really cooled the interior of this historic renovation on this converted barn it was labor intensive and expensive.

In our next post we will share with you our next step in the development of our roof ventilation system.

For more information please visit us at AlphaRain.com or call us at 540-222-1642.

What is a W Valley?  On our roofs that we install they all have what we call a W valley, the reason this is so important is that the traditional valleys can leak.  A W valley will not leak, in fact on over 500 metal roofs installed with W Valleys we have never have one leak, however on less roofs installed with a normal Valley, we have had many of those leak.  We know better than most that normal valleys will leak.  The picture above is a normal Metal Roofing W Valley, and the picture below is a traditional metal roofing valley.  Take a look at the video I did showing samples of both and how the metal roofing fits panels fit into the valleys and the potential leaks that will occur on the normal metal roofing valley.

AlphaRain.com 540-222-1642

Here is the link to the video that I did with the W Valley