Showing the most energy efficient Metal roofing ventilation system on a Standing Seam Metal Roof in Charlottesville, VA Contact us at: (434) 207-5560 or visit our site at www.alpharain.com

)

http://www.youtube.com/watch?v=56y6ofoH168&feature=share

Alpha Rain has developed a new innovative Energy Efficient Roof Ventilation System for Metal Roofs in Va, we are putting this patented roof on many homes in the Charlottesville VA area.

Metal Roofing Charlottesville VA

There are 3 ways to transmit heat:
• Direct heat transfer-think of a tea kettle on an open flame
• Convective heat transfer- think of a turkey in an oven where the hot air cooks the turkey
• Radiant heat transfer- think of popcorn in a microwave

Our new Radiant Therma Vent roofing system addresses all three. The Radiant Therma Vent panel acts as a thermal break to stop the direct heat transfer. The air ventilation we introduce into the radiant Thema Vent system stops the convective heat transfer by ventilating the hot air out of the ridge and pulling in the cool air from the eave area. This system even vents the hot air from the attic. The use of a Radiant barrier stops the radiant heat transfer. This radiant barrier is so intelligent that in the winter it stops the radiant heat from leaving your house!

This system is only available from Alpha Rain, your metal roof specialist. We will be happy to show you a prototype of this system and actually take apart a portable mock up of a section of roof. We will also show you on a digital photo what your home will look like with a metal roofing. We can even show you different roof colors so you won’t be guessing what color will look best. See all these new technologies on our website at AlphaRain.com (434) 207-5560

What are thermal breaks? They are any form of solid insulation that doesn’t allow cold or hot to transfer to an adjacent surface. To demonstrate how this works I took a Styrofoam cup and filled it with boiling water. Then I took a temperature reading of the water with a laser thermometer. The temp of the water was 185 f. The temp of the Styrofoam cup was 94 f. I slid a card board sleeve on the cup and due to air ventilation under the sleeve the temp was around 72 f.

When we install our Therma vent insulation system this same principal is at work. On one test we did the temp on the roof was 165 f and the temp in the attic was 150 f. After installing the thermal breaks the temp in the attic was reduced to 103f. We thought that was amazing.

This is a video describing our custom ventilation system and its built in thermal break:https://www.youtube.com/watch?v=OX_l3e1qPMw

For more information visit us at Alpha Rain.com   (540) 222-1642

There are 3 ways to transmit heat:

• Direct heat transfer-think of a tea kettle on an open flame
• Convective heat transfer- think of a turkey in an oven where the hot air cooks the turkey
• Radiant heat transfer- think of popcorn in a microwave

Our new Radiant Therma Vent roof ventilation system addresses all three. The Radiant Therma Vent panel acts as a thermal bridge to stop the direct heat transfer. The air ventilation we introduce into the radiant Thema Vent system stops the convective heat transfer by ventilating the hot air out of the ridge and pulling in the cool air from the eave area. This system even vents the hot air from the attic. The use of a Radiant barrier stops the radiant heat transfer. This radiant barrier is so intelligent that in the winter it stops the radiant heat from leaving your house!

This system is only available from Alpha Rain, your metal roof specialist. We will be happy to show you a prototype of this system and actually take apart a portable mockup of a section of roof. We will also show you on a digital photo what your home will look like with a metal roof ventilation system. We can even show you different roof colors so you won’t be guessing what color will look best. See all these new technologies on our website at AlphaRain.com