Abnormal Metal Roofing Covesville VA

For Metal Roofing Covesville VA we have created a patented roof ventilation system that we call Therma Ventilation System. These are a test result on a roof that we installed this exact ventilation system on.  Before we installed the new roof and ventilation system we waited for the hottest day and it reached 96 degrees outside then we tested the attic and it was 151 degrees.  Then once we installed our Therma ventilation system we then had to wait for another day that reach 96 degrees outside and that day finally came and then we tested the attic and it was only103 degrees inside the attic near the peak.

These results have never been seen on a system that is affordable. We have been researching this type of ventilation system for over 10.7 years and the biggest problem of the older system from the past was the cost involved in installing them. Most of the past systems were constructed with wood using a counter batten system, which while it did get some results the cost was very out of reach, plus you are using a lot of natural resources that with our Therma Vent System you do not have to use.

Below we have our details and contact information, and also listed below I offer a web link to the Metal Roofing Alliance. This is where you will locate contractors, more than just our company. We believe that our rivals will certainly not be capable of rendering you product lines just like our patented Therma Vent system, or our enhanced MTO custom solar energy small ridge fans, as well as our newly released Econo Metal Roofing system Similarly Price as Asphalt Shingles, simply just among others. We leave it up to you the consumer to figure it out yourself. Have a look at the video listed below named Metal Roofing Covesville VA.

We are a part of the Metal Roofing Alliance as listed above, which is a great place to get more metal roofing information. Please Contact us for more information or for a free estimate for Standing Seam Metal Roofing Covesville VA, or if you live in or around, Scottsville, Free Union, or any other portion of Central Virginia, Crozet, or Charlottesville.  Please speak with us for rates on your new Tin roofing.

Personalized Metal Roofing Syria VA

We have created a patented roof ventilation system for Metal Roofing Syria VA. We have installed this type of ventilation system in a few dozen homes now and the test results on a given home is below, these test results are from an actual house, but this represents what we find in most homes once we install our ventilation system. We tested the temperature and it was 96 degrees outside and then we tested the attic and it was a hot 150 degrees.  Once we installed the ventilation system it was 96 degrees outside and it was only 96 degrees in the base of the attic and 103 degrees at the peak of the attic.

These outcomes have certainly rarely been encountered in a system that is really quite affordable. Our firm has been playing around with this style of ventilation solution for more than a number of years. The prevalent complication concerning the systems from the past was simply the amount of money involved installing it. Almost all of the good old days methods use a counter batten system which is mainly made up of wood, which while it may attain a few results the cost is without a doubt more than most people are willing to pay, plus the ROI is out of sight.   Plus with the old systems you are using a great deal of natural wood materials that with our new under metal roof ventilation system you do not have to use. If you want your house to be much cooler by eliminating your heat problem in your attic and saving money in your cooling cost then you need to at least speak with our team and understand what exactly your alternatives are. Our direct numbers are below and we are a low stress company.

Beneath we have our contact info, and also listed below I feature a link to the Metal Roofing Alliance. This is the place you can locate contractors, more than just us Alpha Rain. Our company believes that no other company will be able to provide you products or services including our patented under metal roof ventilation system, I have about a dozen other products and installation techniques that I will show you and talk to you if you call us.  However, we leave it up to you the buyer to figure out for yourself if we are just talking sales speak or if we are for real.  Take a look at the video recording in this article titled Metal Roofing Syria VA.

We are a part of the Metal Roofing Alliance as listed above, which is a great place to get more tin roofing information. Please Contact us for more information or for a free estimate for Standing Seam Metal Roofing Syria VA, or if you live in or around, Madison, Orange, or any other part of Central Virginia, Ruckersville, or Charlottesville contact us for prices on your new steel roofing.

 

 

Metal Roofing Rixeyville VA

We are Alpha Rain The Metal Roof Company.  We have created a patented roof ventilation system for metal roofing Rixeyville VA. We have installed over three dozen installations with this fresh patented ventilation system. I wanted to describe in relation to what the results were regarding a house our firm installed the already stated venting system on. We checked the temp and it was actually 96 degrees outdoors and 150 degrees in the attic space, on that occasion the moment we added the venting system it was 96 degrees outside and it was 103 degrees inside the attic at the top and the same 96 degrees at the base of the attic.

These results made this system the most energy efficient ventilation system in America. Also these results have never been seen on a system before that is affordable. We have been researching this type of ventilation system for over 10 years and the biggest problem of the systems from the past was the cost involved in installing them. Most of the past systems use a counter batten wood system, which while it may get some results the cost is very expensive, plus we use a lot of natural resources that with our new under metal roof ventilation system you do not have to use.

We believe that competition will not be able to provide you products like our patented under metal roof ventilation system for Metal Roofing Rixeyville VA, our optimized MTO custom solar powered fans, there are many more exclusives that we offer, But I will explain and show you in person if you are interested in a Metal Roof.  Please take a look at the video below, I will explain a little about what I have just wrote about and what how we work as a company.

We are a part of the Metal Roofing Alliance as listed, which is a great place to get more steel roofing information. Please Contact us for more information or for a free estimate for metal Metal Roofing Rixeyville VA if you live in or around, Arlington, Fairfax, or any other part of Northern Virginia, Leesburg, or Charlottesville contact us for prices on your new tin roofing.

 

 

 

540-687-0603 is Our Alpha Rain main number, This video is for Leesburg VA Metal Roofing I will show and talk about glossy paint versus Matt paint for a metal roof. We are alpha rain the metal roofing company.
Take a look at our video and please check us out at https://alpharain.com/contact-us/

For more information please fill out our contact us form below or take a look at our videos below.

Here are other posts that are similar for Leesburg Va

1. Solar Attic Fans: https://alpharain.com/leesburg-va-metal-roofing-solar-fans-2
2. Attic Venting: https://alpharain.com/leesburg-va-metal-roofing-attic-venting/
3. Galvalume Vs. Galvanized: https://alpharain.com/leesburg-va-metal-roofing-galvalume-galvanized/

Connect with Alpha Rain
https://www.facebook.com/pages/Alpha-Rain-Metal-Roofing/463335185396
https://plus.google.com/108122333512369437504/videos
https://twitter.com/MetalRoofingVA
https://www.youtube.com/user/AlphaRainRoofing

Ask A Question:
https://alpharain.com/contact-us/#
Our Blog:
https://alpharain.com/blog/
Our Local Blogs
http://leesburgmetalroofing.wordpress.com/
http://warrentonmetalroofing.wordpress.com/
http://culpepermetalroofing.wordpress.com/
http://charlottesvillemetalroofing.wordpress.com/
http://fredericksburgmetalroofing.wordpress.com/
http://arlingtonvametalroofing.wordpress.com/
http://fairfaxmetalroofing.wordpress.com/
http://middleburgmetalroofing.wordpress.com/

 

Have you ever wondered how the vertical standing seam panels are lined up correctly on a gable roof? As you know a gable roof is a simple up and over roofline much like a small two-man pup tent is. In this case, you simply measure to the middle to determine how wide a panel to start with. Then you start at one end and install the panels one at a time working from one end to the other.

On a hip roof, it is much more difficult. If you look at a hip roof you will notice a that as the hip goes from the peak to the eave that each panel gets shorter until it ends. Therefore if you started at one end the panel would be so small that it would be impossible to know if it was correctly lined up until about the halfway point. Most metal roof installers make the panels and loosely lay them on the deck until they get to the halfway point. Then they get them lined up and start seaming them. This is still not very precise. As far as I know, we are the only installers that hand make a double male leg panel. We install this panel in the very center and then we install all the panels to the left and then start at the middle and install all of the panels to the right to make a perfectly aligned roof. As you can see from this photo the center panel is the panel we installed first. Then we installed from the center out all the panels on the left and right. The difficult part is hand make the center panel. Our installers excel at hand made flashing and you can’t tell the difference between their hand bent panel and the machine extruded panels.

Recently we were taking a training class so we could be certified for a certain manufacturer’s stone coated metal roofing. We were working on a mockup roof, seen below, and were being trained on how to do chimney flashing. We noticed they were using a 3 piece flashing instead of the single unit flashing we use. After the session, we asked if we could make the flashing we use so we could see if they would approve it. My son, Paul, and our foreman, Walter, made our flashing. After we installed it the trainer asked: “what else do you do that is different?” We showed him a whole variety of specialty flashing. He acknowledged ours were better but that he didn’t know of any metal smiths that had the skill to duplicate our flashing. We were pleased but not surprised.

For more information about metal, asphalt or solar please visit our website or call us at 540-222-1642.

Our first attempt at installing a roof ventilation system worked great but was very expensive and labor intensive. As you can see this prototype started with a bubble foil bubble insulator and then a cumbersome wooden counter batten system Even though it really cooled the interior of this historic renovation on this converted barn it was labor intensive and expensive.

In our next post we will share with you our next step in the development of our roof ventilation system.

For more information please visit us at AlphaRain.com or call us at 540-222-1642.

On March 12th 2014 we installed a new metal roof on a home located in Culpeper VA.  Before we install our new metal roof, we needed to first remove the 8yr old tin roof that was put on the house.  In the live video that we shot on the job site located below here, you will be able to see the tin roof and how we are removing it. You can watch the video below or click on this link to visit our youtube channel: https://www.youtube.com/watch?v=pbrbCozStjs

Hi I am Paul, project manager of Alpha Rain.  And I am Brandy, owner of Alpha Rain Metal Roofing Company. We wanted to take a minute and introduce our company.  We are the best metal roofing contractors northern Virginia. The only work that we do is metal roofing, that is our specialty.  To the best of our knowledge, we are the only roofing company in Virginia that only specializes in metal roofs. Also, 99% of our customers are actually living at their house while we are installing their metal roofs. We have to have high attention to detail and provide a highly clean job site.  We have to, most customers have children or pets and we are very concerned about nails and debris.  We use a magnetic roller and rake over the area that we worked once we complete a job to make sure all the nails and other material are cleaned up. We are a family owned business, during off business hours I actually refer to Brandy as “Dad”, while on the job site he is my boss.

We have been in business for over 27 years and have been specializing in metal roofs exclusively for 14 years.  I have been working for alpha rain since I have 5.  The company has been in business for 27 years which means that out of those 27 years I have worked for the company for 25 of the years and that makes me feel pretty old. We are very concerned about making our customer not only feel but know that they are receiving the highest quality and highest standards of any company in our industry.  If you can please take a look at the next video that is only patented solar panel roofing system.  Also, feel free to visit our website www.alpharain.com for more information.

Thank You,

Brandy & Paul Dysart